The Raven's Egg Support Spindle

Dave has named this beautiful 1.0 ounce (27 gram) egg whorl support spindle "The Raven's Egg".  He has scrimshawed the alternative ivory egg whorl with two depictions of a raven.  The 10" shaft was crafted from ebony.

Dave spends hours painstakingly etching with a needle on each egg, so the prices will vary depending on how much scrimshaw is on each egg. 

The egg whorl of this support spindle was crafted by Dave from an alternative ivory composite material created by him using a formula of resin, calcium carbonate (powdered limestone) and recycled mammoth ivory dust that he collects from his carvings and sawing of mammoth ivory. He casts the alternative ivory material into turning blanks, then turns the egg shape whorl together with the wooden shaft for balance.

Mini French Cove and Groove Support Spindle and Bowl Set

This beautiful 8 1/2 inch French style support spindle was crafted by Dave from figured Oregon myrtlewood. This spindle features a cove and groove pattern along the shaft, and a groove and slot style tip for holding the yarn twist. The Dymondwood tip is a deep, emerald green. The weight of this spindle is 0.5 ounces (15 grams).

Our mini support spinning bowls combine the efficiency of a ceramic surface with the stability of a beautiful wooden base. The dimpled ceramic insert measures 1 3/8 inches in diameter, and the gorgeous figured Oregon myrtlewood base is 2 1/4 inches in diameter and 7/8 inch in height. The ceramic spinning bowl inserts were glazed by hand and kiln fired. Cork has been added to the bottom of this bowl to keep the wood from scratching other hard surfaces.

Mini Dimpled Ceramic and Wood Support Spindle Bowls

Five new mini support spinning bowls were listed in our Etsy shop today.  These adorable little spindle bowls feature a dimpled earthenware ceramic insert.  The woods used in these bowls are hard maple, figured Oregon myrtlewood and African mahogany.

Tatting Picot Gauge Sets

Three new tatting picot gauge sets were listed for sale in our Etsy shop today.  These unique sets of brass picot gauges are a Grizzly Mountain Arts original design. The entire set telescopes inside each other and then slides neatly into the Oregon myrtlewood gauge case. The four size increments are: 1/4, 3/16, 1/8 and 1/16. Also included is a 2 inch brass ruler.  Thuya burl, Oregon myrtlewood and ambrosia maple are the woods used above.  If you'd like to see additional photos of these beautiful tatting tools, please visit our Etsy shop.

Brass Picot Gauge Set with Wooden Case©

Mini Scrimshawed Alternative Ivory Egg Whorl Support Spindle Travel Set

These little beauties are perfect for lace weight and other fine, lightweight fibers. 

The egg whorl of this mini support spindle was crafted by Dave from an alternative ivory composite material created by him using a formula of resin, calcium carbonate (powdered limestone) and recycled mammoth ivory dust that he collects from his carvings and sawing of mammoth ivory. He casts the alternative ivory material into turning blanks, then turns the egg shape whorl together with the wooden shaft for balance. Dave has adorned this egg whorl with a scrimshawed floral pattern.  The 8 1/4 inch shaft from bloodwood. The weight of this beautiful spindle is 0.7 oz. (20 grams).

Also included with this set is a mini ceramic spinning bowl that travels securely in it's zippered pouch.

New Alternative Ivory Druid's Egg Support Spindles

Four beautiful alternative ivory Druid's Egg support spindles were recently added to our Etsy shop.  Dave chose cocobolo, ebony, Brazilian ebony and bloodwood for the shafts of each unique handspinning tool.  If you'd like to view additional photos of each spindle, please click the link for the woods highlighted above.

New Crochet Hook Set with Stand

If you are a serious collector of handmade fiber art tools, then this gorgeous crochet hook set and stand is for you!

Dave has crafted the elegant crochet hook stand, which measures 7 inches in height with an approximate 3 inch diameter base, from silver maple. The hooks, which are crafted from birch and exotic woods, measure about 6 inches in length. The exotic finials are cocobolo, redheart, purpleheart, Pacific yew and maple burl. The size of each hook has been burn etched into the wood.  Additional photos of these fiber art tools can be seen in our Etsy shop.

Hook sizes: 

-- G7-4.5mm
-- H-5.00mm
-- I-5.50mm
-- J-6.00mm
-- K-6.50mm

New Spindles

Three new spindles were listed in our Etsy shop today.  The handspinning tool above was crafted from Swiss pear and cocobolo.  Our Victorian lace weight top whorl spindle features checkering around the whorl and a Victorian era leaf motif.  Also listed today were two French style cove and groove support spindles. Please click the links to view additional photos of these tools.

Oregon Myrtlewood and Dymondwood

Paduak and Dymondwood

Heirloom Mini Support Spindle and Ceramic Spinning Bowl Set

Dave has combined his years of experience as a scrimshaw artist, ivory carver and spindle maker to create this one-of-a-kind heirloom mini support spindle. 

This 9 inch spindle features a 1.5 inch diameter rosewood whorl with a relief carved leaf motif and two miniature ancient mammoth ivory roses also hand carved by Dave and inset into the whorl. This mammoth ivory is at least 10,000 years old, the approximate time at which mammoth became extinct. The shaft is turned from hard maple with a very hard rosewood tip. 

The spindle has been sealed and has a hand rubbed finish using Renaissance wax. This wax is a micro-crystalline polish made of refined waxes blended to a formula used by the British Museum and restoration specialist internationally to revive and protect museum quality pieces.

Accompanying this little beauty is a mini ceramic spinning bowl which has been decorated with glaze by hand. A faux suede bag is included to store your bowl when it's not in use.

Oregon Myrtlewood Burl, Hard Maple and Box Elder Tibetan Support Spindle

This beautiful support spindle weights 1.2 ounces (33 grams). The hard maple shaft measures about 11 inches in length, and the whorl which was crafted from Oregon myrtlewood burl, measures about 2 inches in diameter. The voids of the burl have been filled with brass. The tip has been crafted from dyed and stabilized box elder.

When constructing his spindles, Dave mounts the spindle whorl blank on the shaft, and then turns and shapes the whorl and shaft together to achieve a well balanced spindle.  Additional photos of this handspinning tool can be found in our Etsy shop.

New Top Whorl Drop Spindles

Four new top whorl drop spindles were listed in our Etsy shop today.  The woods used on the three featured above are from left to right, apricot/walnut, birdseye maple/cherry and holly/cherry.  The DIY spindle pictured below was crafted from poplar and birch.

New Lap Support Spinning Bowls

Four new lap support spindle bowls were listed in our Etsy shop today.  The lighter wood bowls were crafted from silver maple, and the other bowls are African mahogany.  All of these spinning bowls feature our dimpled ceramic inserts. 

Mini Eucalyptus Burl, East Indian Rosewood and Dymondwood Tibetan Support Spindle Travel Set

The 1 1/2 inch whorl of this mini Tibetan spindle was crafted from eucalyptus burl. The 8 1/2 inch shaft has been crafted from East Indian rosewood, and the tip has been crafted from purple dymondwood. The weight of this beautiful spindle is 0.8 oz. (21 grams).

When constructing his spindles, Dave mounts the spindle whorl blank on the shaft, and then turns and shapes the whorl and shaft together to achieve a well balanced spindle.

Also included with this set is a mini ceramic spinning bowl that travels securely in it's velvet pouch.

Mini Tibetan Support Spindle with Mini Dimpled Bowl Set

The 1 5/8 inch whorl of this mini Tibetan spindle was crafted from ambrosia maple. The 8 1/2 inch shaft has been crafted from hard maple, and the tip is a gorgeous stabilized box elder. The weight of this beautiful spindle is 0.8 oz. (22 grams).

The accompanying maple mini spindle bowl measures 2 inches in diameter and 1 inch in height, with the dimpled ceramic insert measuring 1 1/2 inches in diameter.

When constructing his spindles, Dave mounts the spindle whorl blank on the shaft, and then turns and shapes the whorl and shaft together to achieve a well balanced spindle.  Additional photos of these handspinning tools can be found in our Etsy shop.

Top Whorl Drop Spindles

These are the newest top whorl drop spindles crafted by Dave.  The whorl woods are Oregon myrtlewood, maple burl and birdseye maple.  Please visit our Etsy shop to see additional photos of other fiber art tools by Grizzly Mountain Arts.

Ambrosia Maple, Hard Maple and Diamondwood Tibetan Support Spindle

This beautiful Tibetan support spindle weights 0.9 ounces (25 grams). The hard maple shaft measures about 11 inches in length, and the whorl which is crafted from ambrosia maple, measures about 1 3/4 inches in diameter. The tip has been crafted from emerald green diamondwood.

When constructing his spindles, Dave mounts the spindle whorl blank on the shaft, and then turns and shapes the whorl and shaft together to achieve a well balanced spindle.