Ambrosia Maple Support Spinning Bowls

Our originally designed support spinning bowls combine the efficiency of a ceramic surface with the stability of a wide beautiful wooden base. The ceramic insert measures 1 3/4 inches in diameter, and the gorgeous twice turned ambrosia maple base is 2 3/4 inches in diameter and 2 inches in height. Cork has been added to the bottom of this bowl to keep the wood from scratching other hard surfaces.

**What is twice turned wood?**

Some of the woods that Dave uses, such as this ambrosia maple, can only be found green or "wet".  Green or "wet" wood has to be dried before it is used, otherwise the finished project would warp, crack or check.  Since Dave doesn't have a wood kiln to dry these woods, he cuts the wood to size and turns it once to get the desired shape.  He then sets it aside for months to allow the moisture to escape.  Once he has determined that all of the moisture is gone, he then turns the piece again which results in the finished project.

1.0 oz. Bubinga Tibetan Support Spindle with Matching Bowl

This beautiful little Tibetan support spindle weights 1.0 ounces (28 grams). The hickory shaft measures about 11 inches in length and the whorl, which is crafted from bubinga, measures about 2 inches in diameter.

Accompanying this spindle, is one of our originally designed support spinning bowls that combines the efficiency of a ceramic surface with the stability of a wide beautiful wooden base. The ceramic insert measures 1 3/4 inches in diameter, and the gorgeous bubinga base is 3 inches in diameter. Cork has been added to the bottom of this bowl to keep the wood from scratching other hard surfaces.

We are making the ceramic inserts for our support spinning bowls in a variety of glazes, and no two pieces ever come out of the kiln the same. Your bubinga and ceramic support spinning bowl will be one of a kind.

New Carved Moose Antler Spindles

Four new moose antler spindles carved by Dave, were listed in our Etsy shop today.  One is a beautiful bottom whorl drop spindle, and the other three are rim weighted top whorl drop spindles.  Each of these feature Dave's signature leaf motif carved into the moose antler whorls.  The woods used on these spindles are from left to right:

*Cocobolo and Moose Antler-bottom whorl

*Moose Antler and Cocobolo

*Moose Antler and Honduras Rosewood

*Moose Antler and Ebony

New Top Whorl Drop Spindles

We have added five new top whorl drop spindles to our Etsy shop today.  The woods use by Dave to craft these beautiful spindles are from left to right:

*Walnut and Birch

*Hormigo Negro and Hickory

*Spalted Maple and Birch

*Birdseye Maple and Mahogany

*Cocobolo and Birdseye Maple

New Tibetan Support Spindles with Matching Bowls

Three new Tibetan style support spindles were added to our Etsy shop today.  Each spindle comes with a matching spinning bowl.  The woods pictured above are canarywood, bubinga and goncalo alves.

Getting Out of Show Business

SOLD!

It's been eight years since we started doing the art/craft show circuit and it's time for Grizzly Mountain Arts to retire from the show business.  We're still in business, just doing it all online these days.  You can find us here if you'd like to see what we're up to these days.

Since we've decided to hop off of the show circuit, we are selling our complete booth set up via Craigslist.  The following is for sale for $300 (cash only, please):



*10x10 fire resistant heavy weight, steel framed Caravan brand canopy with four walls
*Four 2x4 folding tables
*Four custom fitted no-iron maroon tablecloths
*Four canopy weights
*All shelving seen in the photos

The banner, jewelry, jewelry displays and baskets are not for sale.

If you happen to live in the Central Oregon area and are interested, please send us an email!

New Andean/Peruvian Style Bottom Whorl Drop Spindles

These are Dave's newest Andean style bottom whorl drop spindles. The woods used are from left to right:

*Cedar and Mahogany

*Oak and Redheart

*Walnut and Hickory

*Poplar and Cherry

*Paduak and Hickory

Be sure add "Like" Grizzly Mountain Arts on Facebook to get the latest updates on our new fiber art tools BEFORE they are listed in our Etsy shop!

Andean/Peruvian Style Reproduction Bottom Whorl Drop Spindles

These new spindles are reproductions of an Andean style spindle. Andean spindles are suspended drop spindles with no frills...no hook, no notches and no grooves. They were developed to spin long-staple alpaca and other camelid fibers native to the Andes. Spinning is done off the side using a half hitch.

I have made these spindles in the same affordable and basic fashion as the original Andean spindles with one exception--I mount the spindle whorl blank on the shaft, and then turn and shape the whorl and shaft together to achieve a well balanced spindle. My reading and research on Andean spindles indicate that the whorls are shaped first and then fitted on a hand shaped (sometimes not too straight) shaft. I assume that one benefit of this is that once a shaft is worn out the whorl can be removed and fitted to a new shaft, but I just cannot bring myself to make a spindle that wobbles so these whorls are permanently fixed and balanced.

Carved Moose Antler and Cocobolo Rim Weighted Top Whorl Drop Spindle

This unique 1.1 ounce (30gram) moose antler rim weighted top whorl drop spindle has been intricately carved by Dave with his signature leaf motif. The notched whorl measures 1 5/8 inches in diameter, and the cocobolo shaft is 7 1/4 inches in length. The bottom of the shaft has been shaped to accommodate a half hitch and a brass hook has been added to the top.  Please click here to view additional photos of this beautiful handspinning tool.

Carved Moose Antler and Purpleheart Bottom Whorl Drop Spindle

This unique 1.4 ounce (41grams) moose antler bottom whorl drop spindle has been intricately carved by Dave with his signature rose and leaf motif. The whorl measures 1 7/8 inches in diameter, and the purpleheart shaft is 9 1/2 inches in length. A brass hook has been added to the top, and a steel bumper to the bottom.  Please visit our Etsy shop to view more photos of this beautiful handspinning tool.

Pacific Yew and Hickory Tibetan Support Spindle

This beautiful Tibetan support spindle weights 1.2 ounces (35 grams). The hickory shaft measures 11 1/2 inches in length, and the whorl, which is crafted from Pacific yew, measures about 1 3/4 inches in diameter.  Additional photos can be seen in our Etsy shop.

Dave checks all of his spindles for balance. Occasionally he finds a spindle whorl that has two different densities (and weights) of wood which can occur naturally, and cause the spindle to wobble. He carefully drills and insets just the right amount of brass rod as a counterbalance to evenly distribute the weight. He has decorated the resulting brass dot as a sun symbol, paying homage to the Navajo people who are famous for their fiber spinning and weaving skills.

Myrtlewood and Hickory Tibetan Support Spindle

This beautiful Tibetan support spindle weights 1.1 ounces (30 grams). The hickory shaft measures 10 1/2 inches in length, and the whorl, which measures about 1 1/4 inches in diameter, is crafted from myrtlewood.  Click here to see additional photos of this tool.

Carved Moose Antler and East Indian Rosewood Rim Weighted Top Whorl Drop Spindle

**Due to export restrictions of wildlife materials, we cannot ship products crafted from antler outside of the U.S.**

This unique 1.1 ounce moose antler rim weighted top whorl drop spindle has been intricately carved by Dave with his signature leaf motif. The notched whorl measures 1 5/8 inches in diameter, and the East Indian rosewood shaft is 7 1/4 inches in length. The end of the shaft has been shaped to accommodate a half hitch and a brass hook has been added to the top.  Additional photos can be seen here.

**Moose antlers are naturally shed each year, so no moose were harmed to create this spindle.**

Brass Picot Gauge Set with Thuya Burl Case

This unique set of brass picot gauges is a Grizzly Mountain Arts original design! The entire set telescopes inside each other and then slides neatly into the thuya burl gauge case. The four size increments are: 1/4, 3/16, 1/8 and 1/16. Also included is a 2 inch brass ruler.  Additional photos can be viewed in our Etsy shop.

Brass Picot Gauge Set with Myrtlewood Burl Case©

The Druid's Egg Tagua Nut and Hickory Bead Whorl Support Spindle with Figured Maple Support Bowl

This matching set of handspinning tools includes a vegan ivory tagua nut Druid's egg support spindle and a ceramic and figured maple spinning bowl. Please note that the tagua nut Druid's Egg cannot be turned while mounted on the shaft, therefore each spindle may have a slight wobble.

The tagua nut, also known as vegetable ivory, was beautifully carved by Dave to represent a Druid's Egg. He has crafted the 9 1/2 inch long shaft from hickory, and adorned it with a ring of turquoise. The weight of this supported bead whorl spindle is 1.1 ounces (29g).

Our originally designed support spinning bowl combines the efficiency of a ceramic surface with the stability of a wide beautiful wooden base. The ceramic bowl measures 1 3/4 inches in diameter, and the gorgeous figured maple wooden base is 2 3/4 inches in diameter. Cork has been added to the bottom of this bowl to keep the wood from scratching other hard surfaces.

Cocobolo and Hickory Pear Takli Spindle

Cocobolo and hickory are the woods used by Dave to make this beautiful pear whorl Takli spindle.  A brass hook was added to the top, allowing for use as either a drop spindle or supported spindle.  The weight of this handspinning tool is 1.3 ounces.

Rim Weighted Cocobolo and Pau Ferro Top Whorl Drop Spindle

Dave has crafted the 2 1/2 inch diameter notched whorl of this rim weighted top whorl drop spindle from cocobolo, and the 9 inch shaft from pau ferro. A brass hook has been added to the top.   The weight of this beautiful rim weighted handspinning tool is 1.4 ounces.  Additional photos can be seen at the Etsy listing for this spindle.

5 Pin French Spool Knitters with Buffalo Bone Loop Lifters

Three new 5 pin French spool knitters were added to our Grizzly Mountain Arts Etsy shop today.  From left to right, the materials used are:

*5 Pin Dark Pistachio French Spool Knitter with Fossil Mammoth Ivory Inlay and Buffalo Bone Loop Lifter with Peridot, Garnet and Fresh Water Pearls

*5 Pin East Indian Rosewood French Spool Knitter with Fossil Mammoth Ivory Inlay and Buffalo Bone Loop Lifter with Swarovski Crystals and Swarovski Pearls

*5 Pin Maple Burl French Spool Knitter and Buffalo Bone Loop Lifter with Swarovski Pearls, Swarovski Crystals and Czech Fire Polished Glass

Please visit our Etsy shop to view additional photos of these exquisite handmade fiber art tools made by Dave Stanbrough.

Oregon Myrtlewood and Chechen Rim Weighted Top Whorl Spindle

This 1.0 ounce rim weighted top whorl drop spindle was crafted by Dave.  The whorl is Oregon myrtlewood and the shaft is chechen.

New French Spool Knitters

We have added new French spool knitters to our Etsy shop!  We have added new French spool knitters to our Etsy shop!  These include:

* Black and White Ebony with Mammoth Ivory Inlay

* Thuya Burl with Turquoise Inlay 

* Mahogany with Pyrography

Each of these spool knitters comes with a spangled buffalo bone loop lifter. 

Ambrosia Maple Mini Tibetan Support Spindles with Matching Bowls

This is a new item and wood for Grizzly Mountain Arts!  Each ambrosia maple set is unique and one-of-a-kind.  Unlike spalted maple, which exhibits patterns caused by fungi often softening the wood making it "punky", the unique patterns found in ambrosia maple are caused by boring insects which often leave holes, channels and uniquely colored tracks throughout the wood.  The holes and voids found in some pieces allow for the artistic inlay of materials such as turquoise, brass, copper and silver.

Accompanying each spindle, is one of our originally designed support spinning bowls that combines the efficiency of a ceramic surface with the stability of a wide beautiful wooden base. The ceramic insert measures 1 3/4 inches in diameter, and the gorgeous ambrosia maple base is 2 3/4 inches in diameter and 2 inches in height.

All of the sets shown above have been sold.

Oregon Myrtlewood Tibetan Support Spindle and Spinning Bowl

This Tibetan style supported spindle was crafted by Dave from Oregon myrtlewood.  The matching support spinning bowl is also myrtlewood.  Both the spindle and bowl feature Dave signature pyrographed leaf motif.

Tiger Maple Tibetan Lite Support Spindle with Wormy Maple Spinning Bowl

This beautiful little "Tibetan Lite" support spindle weights 1.0 ounces (28 grams). The hickory shaft measures about 10 1/2 inches in length and the whorl, which is crafted from tiger maple, measures about 1 1/2 inches in diameter.

Accompanying this spindle, is a variation of our originally designed support spinning bowl that combines the efficiency of a ceramic surface with the stability of a wide beautiful wooden base. While it still features our wide base and ceramic insert, this bowl has been raised with a short decorative spindle. The ceramic insert measures 1 3/4 inches in diameter, and the gorgeous wormy maple base is 2 3/4 inches in diameter and 2 3/4 inches in height. Cork has been added to the bottom of this bowl to keep the wood from scratching other hard surfaces.

Maple and Walnut Acorn Needle Minder

Dave has created the beautiful acorn of this needle minder from maple. He has adorned the acorn using pyrography, or burn etching. Hidden inside the acorn is a rare earth magnet which will "mind" your pins and needles.

Rare-earth magnets are strong, permanent magnets made from alloys of rare earth elements. Rare-earth magnets are substantially stronger than ferrite or alnico magnets, so you'll need to keep this away from your credit cards or pacemaker.

The 2 3/4 inch base was crafted from walnut, and cork dots on the back protect your furniture from scratches.

Additional photos of this unique fiber art tool can be found in our Etsy shop.

Ceramic Art Nouveau Pendant with Shell

Jo bought the most beautiful antique Art Nouveau era pewter button a while back, and with that button she made the mold for this piece. The nearly 1 inch diameter earthenware ceramic pendant has been glazed a gorgeous baroque gold color. The multi-colored shell necklace measures 16 inches long, and has a barrel clasp closure.  This is a perfect everyday piece, or could be dressed up by layering it with other longer necklaces.  An additional photo can be seen here.

A gift box is included with every order from Grizzly Mountain Arts.

Ceramic Mayan Sun Pendant with Turquoise

Jo made this Mayan sun pendant from earthenware clay. It has been fired with a chili pepper red glaze. Each pendant comes out of the kiln with it's own unique color properties. The necklace measures 16 inches and has been beaded with turquoise and has a barrel clasp closure.  This necklace is a perfect everyday piece, or could be dressed up by layering it with other longer necklaces.  An additional photo can be seen here.

A gift box is included with every order from Grizzly Mountain Arts.

4 Pin Myrtlewood French Spool Knitter with Buffalo Bone Loop Lifter

This beautiful French spool knitter was crafted by Dave from myrtlewood. He has inset four brass pins into the top. The overall height of this spool knitter is 3 1/2 inches and the inner barrel measures 5/8 of an inch in diameter. Dave has adorned this spool knitter with his signature pyrographic (burn etched) leaf motif.  Jo has spangled the 5 inch buffalo bone loop lifter with glass beads.  An additional photo can be found in our Etsy shop.